Before you start your refinishing project, you must make sure your hardwood floor is clean. The finishing agent that will be applied to the wood must be thoroughly removed from the surface. To do this, you can use a mineral spirits rag and a damp rag. However, you must be careful not to scratch the surface by using any oil-based cleaners, since they will affect the adhesion of the final layer of finish.

1. Hardwood Floor Cleaning

Before you begin refinishing a hardwood floor, you must make sure that it is completely dry. You must cover the area with painter’s tape or plastic sheeting to prevent dust and dirt from getting into the floor. Using a sander with coarse-grit will ensure that the floor is fully dry, so you cannot walk on it. Always wear protective gear, including a mask and goggles to protect your eyes and skin from the sandpaper.

Once you’ve cleared the floor of all debris and stored items, it’s time to refinish it. Scratches and dents can occur over time, and you need to find a professional to restore the damaged area. The best option is to purchase a hardwood floor restoration kit. These kits usually involve applying a chemical solution that will etch the old finish and prepare the floor for a new one.

2. Sanding And Refinishing Doesn’t Fix Gaps

When should you sand your floor? You should do so when the temperature is 65 degrees or above, and it is best to do this in the winter when the wood expands most. In contrast, sanding a hardwood floor during winter will result in the packing material pushing out, causing the wood to shrink and crack. Lastly, you must finish the refinishing project.

When you’re ready to sand your hardwood floor, make sure you have a room that is free of furniture and other items. Before you start sanding, you must remove any shoe molding or quarter-round that may be on the floor. A molding bar or a putty knife can remove stubborn shoe molding. Depending on the size of your room, you’ll also need to use a sander that has the proper sander.

Before you refinish your floor, you must first sand the entire floor thoroughly. You should use 220-grit paper or #000 steel wool to sand the floor. If the area is prone to scratches or other damage, you should leave it covered with a piece of plastic or an old piece of furniture. The process of refinishing hardwood floors can take up to 3 days. A lot of finishes need 24 hours to dry completely, so you should choose your flooring accordingly.

Once you’ve chosen the sandpaper, you need to sand the floor. The sandpaper must be of the proper grit for the job. The refinishing process is done by sanding the floor and applying a protective coating. The finish is then applied to the floor. The cost of a hardwood floor refinishing project can range from $1,000 to $4,000.

3. Apply Polyurethane

While you can do DIY refinishing, you must have a good knowledge of the materials used. You must know the type of polyurethane used. If the wood is light, you can use a cheaper option with less veneer. But if the wood is darker, you should use a polyurethane-based sander. You will need a high-quality brush for the main area of the room.

4. Update Your Hardwood Floor With A New Color

Before you begin, you must know the type of wood stain you want to use. Select the color and type of stain you want to use. The stain should be able to match the type of wood you have in your home. If you have a dark-colored floor, you should buy a dark stain that is not too light. You can buy a darker stain by using a darker color. If you want the expert’s opinions, you can give us a call at (310) 848-4712 or get in touch today to get a free quote. Let’s start working on your floor project today.